Wonder what exactly water damage restoration is? As you know, when your home suffers from water damage, you’ve got a big mess – and a large job – on your own hands. The process of repairing your home to its pre-loss condition after a flood, overflow, or other water damage event is known as water damage and mold restoration. During the water damage and mold restoration process, several key processes take place: loss assessment, categorizing water using the water source’s contamination levels, drying and decontaminating the composition and its contents, monitoring the process, and completion.
Before any restoration task is undertaken, it really is first evaluated so that a proper response is taken. For example, if you were considering getting and restoring a vintage car, you’d need to know exactly what you are dealing with and where to begin. With regards to water damage, not only must the technicians grasp the task ahead of them, insurance companies tend to be involved. Not merely must a water damage and mold restoration technician understand what is damaged and what must be done, the damage must be thoroughly inspected and documented and correct estimates made. The foundation of the damage must also be identified in order that necessary repairs can be made.
Within the assessment, water is categorized in line with the contamination levels (Category 1, 2, or 3) of its drinking water source. For example, water damage from the clean source such as an overflowing sink is simpler to deal with when compared to a water source containing raw sewage. The categories are the following:
o Category 1 – Drinking water from clean sources such as for example sinks, pipes, and toilet bowls (without urine or feces)
o Category 2 – Normal water with some contaminants such as water from a washer, dishwasher, or toilet with urine (but no feces)
o Category 3 – Water that’s extremely unsanitary, with the capacity of causing severe illness or death if the drinking water was ingested. Types of Category 3 drinking water include sewage, water from the toilet bowl made up of feces, floodwaters from rivers, and standing drinking water with microbial growth.
Keep in mind that the foundation water could have originally been fairly clean and sanitary, but it can quickly come into contact with unsanitary contaminants and become Category two or three 3 water.
mold remediation
Water damage usually affects not only the immediate area but additionally the home’s contents. Water damage and mold restoration technicians must also cope with furniture, drapes, carpets, electronics, training books, and other contents affected by the water. A few of these contents will be moved before the water gets to them in an attempt to prevent damage, others will need to come to be dried, cleaned, and decontaminated, among others still will be damaged to the point where they must be discarded.
Finally, the drying, cleaning, and decontaminating process begins. During this time period, equipment such as blowers, scrubbers, subfloor drying tools, and dehumidifiers are placed into place and left for many days with the drying procedure monitored to ensure that the all equipment is placed appropriately and working since it should. Humidity levels, temperature ranges, and moisture content of infected areas are monitored with extra drying continuing as needed. Besides drying, cleaning, decontaminating, mold inhibitors may be used to prevent mold from expanding. Deodorizers may also be required. Even if the water damage and mold was from a Category 1 water resource, contaminants in carpets and the underlying floor covering pad can quickly result in a foul odor.